866-WNDPWRD
sales@acgreenenergy.com

2kW

TALON10 Turnkey Solution(DFW Area):

From $39,990.00 to $68,900.00

(Further Discount & Cash Back Program Available for High Traffic Locations. Call Now for Details! Limited Time Offer Only.)

Financing available



TALON's speed regulation system features a passive variable pitch control mechanism which provides a reliable and productive solution for the small wind system. Since the variable pitch mechanism allows a wider working range than the other designs, TALON10 can produce more energy than turbines using other speed regulation methods, such as tail furling. This also means that you will recover your investment in a shorter period of time.

FEATURES

  • Powerful: Direct drive PMG with neodymium rare earth magnets and improved coil design. Rated wind speed is only 24.6 mph, which is much more efficient than some popular products with a higher rated wind speed and a lower rated power. Because of the variable pitch technology, TALON's work range is much wider and can work up to 56 mph, however the popular products will shut down at high wind when it's the time to harvest power.
  • Reliable Speed Regulation: Dual speed regulation mechanisms are adopted. The Variable Pitch Technology(tm) confines the RPM to below 220 RPM and the electromagnetic brake kicks in when the RPM is over 290 RPM. These two technologies combined to securely keep the system from over speeding.
  • Manual or Auto Shutdown: Manual winch is provided to shutdown the system smoothly. As an option an automated system is available to shutdown the system at a preset triggering condition. Auto shutdown will be trigged at 300 RPM.
  • Superior and Reliable Electronics:Top brand and UL certified electronics for grid-tie approval. The CE certified E-Load box is designed and tested in the toughest conditions and will never fail. The UL 1741/IEEE1541 listed inverters are accepted by most of utility providers for grid-tie operation.
  • High Efficient: 90% generator efficiency and 0.4 blade co-efficiency.
  • Low Noise: <= 65 db.
  • High Survival Wind Speed:The reinforced fiberglass blades can endure 2 times of nominal rpm. It can survive 111.8 mph wind speed when still.
  • Variable Pitch Technology: The only downwind variable pitch wind generator at 10KW available on the market.

1000_performance 1000_output_pwr

 

Here's what is included with our Talon10 system:

  • GENERATOR - 10KW PMG built with neodymium magnets, 3 phases AC output. The housing is precision-cast steel and has been hot-dipped galvanized for anti-corrosion protection. It is built to withstand severe climates, sand and salt corrosion.
  • 3 FIBERGLASS REINFORCED BLADES - mirror finished with UV coating, balanced with hub. High efficient design, whisper quiet and vibration-free.
  • E-Load Box - Power box converts AC 3 phases to DC current. CE listed.
  • INVERTER: UL 1741/IEEE1547 listed grid-tie ready.
  • POLE - 50 foot mono tower. Other size tower available.
  • WARRANTY - 5 year factory warranty.
Technical Specifications
Rotor Diameter
25 Feet
Generator Weight
1102LB (500KG)
Rated Power
10 KW
Peak Power
12.5 KW
Rated Wind Speed
24.6 mph
Startup Wind Speed
6.7 mph
Working Wind Speed
9 mph-56 mph
Survival Wind Speed
112 mph
Rated RPM
200 RPM
Blades
3 Reinforced Fiberglass
Speed Regulation
Passive Variable Pitch& Electromagnetic Brake
Shutdown Mechanism
Manual / Electric Winch
Output/Month
7320 KWH
Output/Month at 12.5mph
2200 KWH

Copyright 1999 - 2010 by A&C Green Energy. All Rights Reserved.